Canon imageRUNNER ADVANCE 8105 Series Service Manual page 895

■
ACC
COPIER > OPTION > ACC
COIN Setting of charge management
Lv.1 Details To set charging management method.
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Following items are automatically specified when changing the value
Caution
to 3 (from 0 to 2). The change will not be returned even if changing
back the value to 0 to 2 (from 3) once the mode has been changed.
•
COPIER > OPTION > USER > CONTROL=1
•
COPIER > OPTION > FNC-SW > DA-CNCT=1
•
COPIER > OPTION > DSPLY-SW > UI-BOX, UI-SEND, UI-FAX=0
•
Preferences > Network > TCP/IP Settings > DNS Settings > FTP
Print Settings > Use FTP Printing=OFF
•
Preferences > Network > TCP/IP Settings > DNS Settings > IPP
Print Settings > Use IPP Printing=ON
Display/adj/set range 0 to 7
0: No charge
1: Charge with Coin Manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: Not used
6: External charge mode 6
7: External charge mode 7
Default value 0
Related service mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> FNC-SW> DA-CNCT
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
Related user mode Function Settings > Send > E-Mail/I-Fax Settings > Communication
Settings
Preferences> Network > TCP/IP Settings > DNS Settings > FTP
Print Settings
Preferences> Network > TCP/IP Settings > DNS Settings > IPP Print
Settings
Supplement/memo Control card can be used with "0: No charge".
DA: Digital Accessory
DK-P Setting of Paper Deck paper size
Lv.1 Details To set the paper size used in the Paper Deck.
Display/adj/set range 0 to 2
0: A4, 1: B5, 2: LTR
Default value 0
8
Service Mode > COPIER > OPTION > ACC
8
Service Mode > COPIER > OPTION > ACC
COPIER > OPTION > ACC
PD-SIZE Setting of Side Paper Deck paper size
Lv.1 Details To set the paper size used in the Side Paper Deck.
Although the setting value 0 to 37 can be set, by setting 1 to 21, the
basic paper size can be set from the user mode.
In the service mode, set the special paper size.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 37
Default value 0
CC-SPSW Support setting of control card I/F
Lv.2 Details To set support level for control card (CCIV/CCV) interface.
Use case Upon user's request (when connecting to the external counter
management system using the control card interface)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No support, 1: Support
Default value 0
UNIT-PRC Setting of Coin Manager currency unit
Lv.2 Details To set currency unit to be handled with Coin Manager
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 6
0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc, 4: Dollar, 5: No
currency unit (no fractional unit), 6: No currency unit (with fractional
unit)
Default value 0
8-180
8-180