5)
Install the Voice Guidance Board Unit to the Main Controller PCB 1.
•
1 Connector
•
4 Screws (TP; M3x6)
MEMO:
Check that the connector is connected properly.
Connector
6)
Insert the Main Controller PCB 1 until it stops.
CAUTION:
Be sure to install the Main Controller PCB 1 while paying attention not to trap cables.
7)
Connect the USB Cable and the Control Panel Cable.
9
Installation > Voice Guidance Kit-F1 > Installation Procedure
x4
F-9-184
F-9-184
9
Installation > Voice Guidance Kit-F1 > Installation Procedure
8)
Cut off [A] part of the Side Cover with nippers.
CAUTION:
When cutting off the part, be sure not to make burrs.
[A]
9-80
F-9-185
F-9-185
9-80