Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1262

4) Install the HDD Cover.
• 1 Claw
•
1 Screw (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
Claw
5) Install the HDD Handle.
• 2 Screws (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x2
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing
6) Affix the HDD No.1 Label to the handle of the Removable HDD.
7) Write down the serial number of the host machine to the label for recording the number,
■
F-9-591
1) Push [A] part, and open the Right Rear Cover 1.
F-9-592
9
Installation > [TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing
and affix it to the area indicated in the figure.
Removing the HDD and HDD Case Unit
[A]
9-300
HDD No.
Serial No.
XXXXXXXX
F-9-593
F-9-594
9-300