Canon imageRUNNER ADVANCE 8105 Series Service Manual page 848

COPIER > OPTION > FNC-SW
KSIZE-SW Set of Chinese paper (K-size) support
Lv.2 Details To set to detect/display the Chinese paper (K size paper: 8K, 16K).
Use case When using K size paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Go through the following: COPIER > OPTION > FNC-SW > MODEL-
SZ; and if MODEL-SZ is "0: AB configuration", this mode is enabled.
Display/adj/set range 0 to 1
0: Not supported, 1: Supported
Default value 0
Related service mode COPIER> OPTION> FNC-SW> MODEL-SZ
Supplement/memo 8K paper: 270 x 390 mm, 16K paper: 270 x 195 mm
PDF-RDCT PDF reduction set at forwarding
Lv.2 Details To set whether to reduce the image for transmission when converting
the image received by IFAX into PDF for e-mail/file transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Following the current setting, 1: Image reduction
Default value 0
REBOOTSW Restart setting at E240 error occurrence
Lv.2 Details To set whether to reboot in the case of E240 error.
In the case of E240 error, the machine is automatically rebooted due
to the possibility of continuous operation of the drive system while
the spooled print job is cleared.
Print job can be obtained if selecting the setting not to reboot.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this at the normal service.
- Be sure to get approval from the user by telling the possibility of
continuous operation of the drive system in the case of E240 error.
Display/adj/set range 0 to 1
0: Rebooted, 1: Not rebooted
Default value 0
Supplement/memo E240 error: Communication error between the Main Controller and
the DC Controller.
8
Service Mode > COPIER > OPTION > FNC-SW
8
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
SJB-UNW Reserve upper limit of secure print job
Lv.2 Details To set the upper limit for the number of reserved jobs in secure print
job.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 50 jobs, 1: 90 jobs
Default value 0
WEBV-SW ON/OFF of WebDAV function
Lv.2 Details To set ON/OFF of WebDAV function.
OFF setting can reduce memory use of the machine. In addition, the
following WebDAV-related items are hidden in user mode.
- Settings/Registration> Set Destination> Register Destinations>
Register New Dest.> File> Protocol> WebDAV
- Settings/Registration> Function Settings> Send> Common
Settings> Use Divided Chunk Send for WebDAV TX
Use case When reducing memory use of the machine
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
Related user mode Settings/Registration> Set Destination> Register Destinations>
Register New Dest.> File> Protocol> WebDAV
Settings/Registration> Function Settings> Send> Common Settings>
Use Divided Chunk Send for WebDAV TX
Supplement/memo WebDAV function is equipped as standard with the machine.
CARD-RNG Card number setting (department number)
Lv.2 Details To set the number of cards (departments) that can be used with the
Card Reader.
Use case When setting the number of cards (departments)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 1000
Default value 1000
8-133
8-133