8) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Encryption Board.
•
2 Connectors
•
6 Wire Saddles
CAUTION:
•
Secure the LED Cable in the direction of the arrow.
•
Check that the STS Cable is connected properly at the time of installation because
the machine can operate even the cable is not connected.
x2
x6
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
9) Insert the HDD.
<In the Case of 2 HDDs>
<In the Case of a single HDD>
F-9-647
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
Connector side
Slot.2 (HDD2)
Slot.1 (HDD1)
Connector side
9-321
F-9-648
F-9-649
9-321