Installing the USB Device Port (only with the products
designed for Europe)
CAUTION:
Use the Card Reader prepared by each sales company.
1) Open the Toner Exchange Cover.
2) Remove the Bottle Regulation Rail.
•
1 Screw
9
Installation > Installation > Installing the USB Device Port (only with the products designed for Europe)
3) Remove the Upper Left Cover in the arrow direction.
•
1 Screw
4) Remove the Clear Cover and Device Port Sheet.
•
2 Screws (Removed screws will be used in step 4))
•
2 Claws
F-9-49
F-9-49
9
Installation > Installation > Installing the USB Device Port (only with the products designed for Europe)
x2
x2
Claws
9-25
F-9-50
F-9-50
F-9-51
F-9-51
9-25