Canon imageRUNNER ADVANCE 8105 Series Service Manual page 951

SORTER > ADJUST
PFLTRRC2 Adj of LTRR C-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper C-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 45
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R31 Adj of A4R out-3-fold position(1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R32 Adj of A4R out-3-fold position(2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRR31 Adj of LTRR out-3-fold pstn (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
8
Service Mode > SOATER > ADJUST
8
Service Mode > SOATER > ADJUST
SORTER > ADJUST
PFLTRR32 Adj of LTRR out-3-fold pstn (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper out-3-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R41 Adj of A4R 4-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper 4-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 30
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R42 Adj of A4R 4-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of A4R paper 4-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRR41 Adj of LTRR 4-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper 4-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 30
Unit 0.5 mm
Appropriate target value 0
Default value 0
8-236
8-236