Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1155

CAUTION:
If there is extra slack of the cables, be sure to tuck them to the host machine side.
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
14) Close the HDD Cap.
• 1 Screw
CAUTION:
•
•
15) Close the Controller Box.
CAUTION:
When closing the Controller Box, check that the LED Cable is not trapped or does not
contact with it.
F-9-396
F-9-397
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
Be sure that the cables do not protrude from the [A] part of the HDD Cap.
If the cables protrude from the [A] part, allow extra slack of the cables at the [B] part
and tuck them to the host machine side.
9-193
[A] [B]
F-9-398
F-9-399
9-193