Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1153

10) Connect the Signal Cable (550mm; FK2-7826) and the Power Supply Cable (570mm;
FK2-7831) to Slot.1.
MEMO:
When connecting the Signal Cables, the side labeled "HDD1" should be connected to
the HDD.
x2
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
Signal Cable (550mm; FK2-7826)
Power Supply Cable (570mm; FK2-7831)
F-9-392
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
11) Put the Signal Cable and the Power Supply Cable through [A] part.
12) Connect the 2 connectors of the Signal Cables and the Power Supply Cables to the
Encryption Board.
CAUTION:
When connecting the Signal Cables, the side labeled "ch.A"should be connected to
CH A on the board.
[A]
x2
9-191
Signal Cable
Power Supply Cable
(570mm; FK2-7831) (550mm; FK2-7826)
CH A
F-9-393
9-191