Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1112

8) Install the LED Board to the side surface of the HDD Case Unit.
• 2 Screws (TP; M3x6)
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
x2
F-9-323
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Mirroring Board or
Encryption Board.
•
2 Connectors
•
6 Wire Saddles
CAUTION:
•
Secure the LED Cable in the direction of the arrow.
•
Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9-150
F-9-324
9-150