Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1215

4) Install the HDD Cover.
• 1 Claw
•
1 Screw (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
Claw
5) Install the HDD Handle.
• 2 Screws (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x2
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation P
6) Affix the HDD No.1 Label to the handle of the Removable HDD.
7) Write down the serial number of the host machine to the label for recording the number,
8) Assemble the other Option HDD (250GB) in the same way according to steps 1) to 5).
F-9-499
9) Affix the HDD No.2 Label to the handle of the Removable HDD.
10) Write down the serial number of the host machine to the label for recording the number,
F-9-500
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation P
and affix it to the area indicated in the figure.
and affix it to the area indicated in the figure.
Serial No.
9-253
HDD No.
Serial No.
XXXXXXXX
F-9-501
HDD No.
XXXXXXXX
F-9-502
9-253