Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1131

■
Installing the Mirroring Board or Encryption Board
MEMO:
The following shows combination of the HDD and the Mirroring Board or Encryption
Board.
•
Connect "CH A" to Slot.1 (The new HDD)
•
Connect "CH B" to Slot.2 (The new HDD)
B
C H
A
C H
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
Power Supply Cable
Signal Cable
Signal Cable
Power Supply Cable
F-9-354
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
1) Open the Controller Box, and free the Signal Cable and the Power Supply Cable of the
host machine from the 4 Wire Saddles and the Edge Saddle at the back of the HDD Case
Unit.
x5
9-169
F-9-355
9-169