Canon imageRUNNER ADVANCE 8105 Series Service Manual page 857

COPIER > OPTION > IMG-FIX
Set fixing/productivity: Spcl ppr A3+
FIX-TMP3
To set priority between productivity and fixing by changing
Lv.1 Details
temperature at which down sequence is applied to special paper A3-
Extension (13"x19").
When 1 is set, fixing has priority over productivity because the
machine is likely to go into the down sequence.
When -1 is set, productivity has priority over fixing.
When changing priority between fixing and productivity for special
Use case
paper A3-Extension (13"x19")
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -1 to 1
-1: Priority on productivity (-3 degC), 0: Normal, 1: Priority on fixing (+3
degC)
Unit 3 degC
Default value 0
FX-IMGLV Set img qlty/prdctvty lvl:Qlty Prrty
Lv.2 Details To set image quality/productivity level when "Quality Priority" is set..
When "Quality Priority" is selected in user mode, productivity may
be extremely decreased to prevent occurrence of image with crepe
mark.
When 0 is set, image quality is slightly decreased compared with its
of normal Quality Priority mode, but productivity improves (suitable
for text document).
When 1 is set, image quality is prioritized so image with crepe
mark does not occur but productivity decreases (suitable for photo
document).
When "Quality Priority" is set in user mode, this item is enabled.
Use case Upon user's request (Alleviation of image with crepe mark)
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to get approval from the user by telling that the productivity
decreases to improve image quality.
Display/adj/set range 0 to 2
0: Text document mode, 1 to 2: Photo document mode
Default value 0
Related user mode Function Settings > Common > Print Settings > Thin/Plain Paper
Printing Priority Settings
8
Service Mode > COPIER > OPTION > IMG-FIX
8
Service Mode > COPIER > OPTION > IMG-FIX
COPIER > OPTION > IMG-FIX
FX-WNKL Setting of paper wrinkle prevention mode
Lv.2 Details To set paper wrinkle prevention mode.
If the edge temperature of the Fixing Roller is lower than the center
temperature, feeding speed at the center of a paper becomes faster
than the speed at the edge so paper wrinkle occurs.
Normally, when printing to A3 or larger size paper at the start of
printing in a high humidity/normal humidity environment, control
temperature is increased by performing idle rotation.
By selecting 2 or 3, idle rotation is performed when printing to B4 or
larger size paper at the start of printing in all environment so paper
wrinkle can be alleviated more.
When 3 (level 2) is set, compared with 2 (level 1), paper wrinkle can
be alleviated more, but the first copy time becomes longer.
Use case - When paper wrinkles occur
- Upon user's request (shorten the first copy time)
Adj/set/operate method Enter the setting value, and then press OK key.
When 2 or 3 is set, the first copy time becomes longer.
Caution
Display/adj/set range 0 to 3
0: OFF, 1: Normal, 2: Level 1, 3: Level 2
Default value 1
Set fixing/productivity: Plain paper
FIX-TMP4
To set priority between productivity and fixing by changing
Lv.1 Details
temperature at which down sequence is applied to plain paper (64 to
90g/m2).
When a positive value is set, fixing has priority over productivity
because the machine is likely to go into the down sequence.
When a negative value is set, productivity has priority over fixing.
- When fixing failure occurs on plain paper
Use case
- When productivity is decreased due to down sequence
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
Unit 3 deg C
Default value 0
8-142
T-8-59
8-142