Removing The Cleaner Separation Claw; Removing The Side Seal - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Side Seal

Removing the Cleaner Separation Claw

<Preparation>
1. Open the Inner Cover. (Refer to "Removing the Primary Charging Assembly")
2. Remove the Primary Charging Assembly. (Refer to page 4-96)
3. Remove the Pre-transfer Charging Assembly. (Refer to page 4-106)
4. Remove the Process Unit. (Refer to page 4-114)
5. Remove the Drum Cleaning Blade. (Refer to page 4-117)
6. Remove the Drum Unit. (Refer to page 4-121)
<Procedure>
1) Put the Process Unit Frame perpendiculararly.
2) Remove the 3 Cleaner Separation Claws.
•
1 Spring each
4
Parts Replacement and Clearning > Image Formation System > Removing the Side Seal

Removing the Side Seal

<Preparation>
1. Open the Inner Cover. (Refer to "Removing the Primary Charging Assembly")
2. Remove the Primary Charging Assembly. (Refer to page 4-96)
3. Remove the Pre-transfer Charging Assembly. (Refer to page 4-106)
4. Remove the Process Unit. (Refer to page 4-114)
5. Remove the Drum Cleaning Blade. (Refer to page 4-117)
6. Remove the Drum Unit. (Refer to page 4-121)
<Procedure>
1) Remove the Side Seals (Front and Rear).
Cleaner Separation
Claws
Spring
F-4-168
4-127
F-4-169
4-127