Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1287

<In the Case of a single HDD>
14) Secure the Signal Cable and the Power Supply Cable.
14-1) Secure the Signal Cable and the Power Supply Cable connected to CH A.
•
8 Wire Saddles
• 1 Edger Saddle
CAUTION:
•
Secure the cables so that there is no extra slack of the cables at [A] part.
• Be sure that the Wire Saddle [B] is properly securing the cables.
x9
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
[A]
CH A
[B]
F-9-658
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
14-2) Connect the Signal Cable and the Power Supply Cable to CH B, and secure them in
place using the 2 Wire Saddles [A].
14-3) Fold extra length of the cables and secure them in place using the 2 Wire Saddles [B].
Power Supply Cable (570mm; FK2-7831)
x2
x4
9-325
Signal Cable
(550mm; FK2-7827)
CH B
[A]
[B]
F-9-659
9-325