Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1276

Checking the Contents
[1] Encryption Board X 1
[6] STS Cable
(340mm(Light Blue); FM3-9152) X 1
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn off the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then disconnect the power plug.
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > Check Items when Turning OFF the Main Power
[2] LED Board X 1 [3] Power Supply Cable
[7] LED Cable [8] Screw (TP; M3x6) X 6
(310mm; FM3-9158) X 1
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > Check Items when Turning OFF the Main Power
[4] Signal Cable
(570mm; FK2-7831) X 2 (550mm; FK2-7826) X 1
[9] LED Label X 1
9-314
[5] Signal Cable
(550mm; FK2-7827) X 1
F-9-628
9-314