9) Open the Controller Box, and free the Signal Cable and the Power Supply Cable of the
host machine from the 4 Wire Saddles and the Edge Saddle at the back of the HDD Case
Unit.
x5
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
10) Remove the HDD Case Unit.
•
2 Screws (The removed screws will be used in "Installing the Mirroring Board or Encryption
Board and HDD Case Unit" step 3).)
F-9-448
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
x2
F-9-449
9-227
9-227