Removing The Left Deck Pickup Unit - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Left Deck Pickup Unit

Removing the Left Deck Pickup Unit

<Preparation>
1. Remove the Right Deck. (Refer to page 4-195)
2. Remove the Left Deck. (Refer to page 4-194)
<Procedure>
1) Disconnect the Connectors.
2) Remove the Pickup Unit Fixation Plate (Upper/Right).
•
3 Screws
Pickup Unit Fixation Plate(Upper)
x3
4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Left Deck Pickup Unit
F-4-425
Pickup Unit Fixation Plate(Right)
F-4-426
3) Remove the Left Deck Pickup Unit.
Note: Points to Note at Installation
When installing the Left Deck Pickup Unit, pull out the Fixing Feed Unit for approx.
10cm to install, and then return the unit to its original position after installation.
MEMO:
Be sure to check that the parts number of Pickup Unit is correct.
4-215
F-4-427
F-4-428
4-215