Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1152

8) Install the LED Board to the side surface of the HDD Case Unit.
• 2 Screws (TP; M3x6)
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
x2
F-9-390
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Encryption Board.
• 2 Connectors
•
6 Wire Saddles
CAUTION:
• Secure the LED Cable in the direction of the arrow.
•
Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9-190
F-9-391
9-190