Canon imageRUNNER ADVANCE 8105 Series Service Manual page 630

E Detail
Location Item
Code Code
E197 -0006 -05 Title Error in Feed Driver PCB Drawer Connector connection
detection
Remedy 1. Check the connection between the DC Controller PCB
(PCB1) and the Fixing Feed Drawer.
DC Controller side: J431, J432, Fixing Feed Drawer (host
machine side): J3002D
Fixing Feed Drawer (Fixing Feed side): J3002L, Feed
Driver side: J300, J301
2. Replace the Feed Driver PCB (PCB3).
3. Replace the DC Controller PCB (PCB1).
Description Connection between the DC Controller PCB (PCB1) and the
Feed Driver PCB (PCB3) is disconnected.
E197 -0008 -05 Title Error in Fixing Drawer Connector connection detection
Remedy 1. Check the connection between the Main Driver PCB (PCB2)
and the Fixing Drawer.
Main Driver side: J105, Fixing Drawer (host machine side):
J3001D
Check the Harness of the Fixing Drawer (Fixing side)
(J3001L).
2. Replace the Main Driver PCB (PCB2).
Description Connection between the DC Controller PCB (PCB1) and the
Main Driver PCB (PCB2) is disconnected.
E197 -0009 -05 Title Error in the Process Unit connection detection
Remedy 1. Check the connection between the Main Driver PCB (PCB2)
and the Process Unit.
PCB side: J107, Process Unit side: J3060
2. Replace the Process Unit.
Description Connection between the Main Driver PCB (PCB2) and the
Process Unit is disconnected.
E197 -0010 -05 Title Error in Primary Charging High Voltage PCB connection
detection
Remedy 1. Check the connection between the Main Driver PCB (PCB2)
and the Primary Charging High Voltage PCB (PCB11).
Main Driver side: J111, Primary Charging High Voltage
side: J3501
2. Replace the Primary Charging High Voltage PCB (PCB11).
Description Connection between the Main Driver PCB (PCB2) and
the Primary Charging High Voltage PCB (PCB11) is
disconnected.
7
Error Code > Error Code > Error Code Details > E100 to E197
Description
7
Error Code > Error Code > Error Code Details > E100 to E197
E Detail
Location Item
Code Code
E197 -0011 -05 Title Error in Developing High Voltage PCB connection detection
Remedy 1. Check the connection between the Main Driver PCB (PCB2)
and the Developing High Voltage PCB (PCB12).
Main Driver side: J112, Developing High Voltage side:
J3511
2. Replace the Developing High Voltage PCB (PCB12).
Description Connection between the Main Driver PCB (PCB2) and the
Developing High Voltage PCB (PCB12) is disconnected.
E197 -0012 -05 Title Error in Transfer High Voltage PCB connection detection
Remedy 1. Check the connection between the Duplex Driver PCB
(PCB4) and the Transfer High Voltage PCB (PCB13).
Duplex Driver side: J343, Transfer High Voltage side:
J3062
2. Replace the Transfer High Voltage PCB (PCB13).
Description Connection between the Duplex Driver PCB (PCB4) and the
Transfer High Voltage PCB (PCB13) is disconnected.
E197 -0181 -05 Title Serial communication error
Remedy Replace the DC Controller PCB (PCB1).
Description Failure of reception from the video signal control ASIC.
Data reception was failed 5 times in a row when reading data
from the video signal control ASIC (at FG lock detection, BD
lock detection).
7-16
Description
T-7-5 T-7-5
7-16