Canon imageRUNNER ADVANCE 8105 Series Service Manual page 840

COPIER > FUNCTION > MISC-P
ENV-PRT Temp&hmdy/surface temp of Fix Roll log
Lv.1 Details To output data of the temperature and humidity inside the machine/
surface temperature of the Fixing Roller as a log.
When figuring out the past temperature inside the machine/fixing
Use case
temperature information at trouble analysis
Adj/set/operate method Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Required time Approx. 30 seconds
PJH-P-1 Detail info of print job history:100 job
Lv.1 Details To print the print job history for the latest 100 jobs with detailed
information.
In the case of less than 100 jobs, the history of all print jobs is
printed.
Use case When printing the print job history with detailed information
Adj/set/operate method Select the item, and then press OK key.
Supplement/memo Output the print job history with detailed information which is not
displayed/printed in the job history screen under "System Monitor>Pr
int>Log>Printer" and in the report of the print job history.
PJH-P-2 Detail info of print job history:all job
Lv.1 Details To print the history of all print jobs stored in the machine with detailed
information (for maximum 5000 jobs).
The difference between PJH-P-1 and this item is only the number of
jobs printed.
Use case When printing the print job history with detailed information
Adj/set/operate method Select the item, and then press OK key.
Supplement/memo Output the print job history with detailed information which is not
displayed/printed in the job history screen under "System Monitor>Pr
int>Log>Printer" and in the report of the print job history.
WB Reverse toner forcible eject: blank band
Lv.2 Details To eject the reverse toner forcibly.
After execution, it automatically stops.
Use case When operating in a high duty and low humidity environment for a
long time (executed by administrator)
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range In processing: ACTIVE, At normal termination: OK, At abnormal
termination: NG
Required time 60 seconds
8
Service Mode > COPIER > FUNCTION > MISC-P
8
Service Mode > COPIER > FUNCTION > MISC-P
COPIER > FUNCTION > MISC-P
BB Toner forcible eject (black band)
Lv.1 Details Forcibly discharge low-charge toner, and send it to the drum cleaner
unit.
The operation automatically stops after execution.
Use case When operating the machine in low-duty and high-humidity
environment for a long period of time (implemented by the
administrator)
Adj/set/operate method Select the item and press the OK key.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time 60 seconds
DMAX-N Execute plain paper group D-max control
Lv.1 Details To execute D-max control for plain paper group manually. (It is
usually executed automatically.)
The result is displayed in COPIER> DISPLAY> DENS> DMAX-N.
Use case When checking single-part operation at replacement or cleaning of
the Patch Sensor
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to execute this item after P-LED and P-BASE.
Display/adj/set range During operation: ACTIVE, At normal termination: OK, At abnormal
termination: NG
Required time 4 seconds
Related service mode COPIER> DISPLAY> DENS> DMAX-N
P-BASE Detection of background by Patch Sensor
Lv.2 Details To detect the ETB background by the Patch Sensor. (It is usually
executed automatically.)
The result is displayed in COPIER> DISPLAY> DENS> P-B-AVE,
P-B-MAX, P-B-MIN.
Use case When checking single-part operation at replacement or cleaning of
the Patch Sensor/ETB
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to execute this item after P-LED.
Display/adj/set range During operation: ACTIVE, At normal termination: OK, At abnormal
termination: NG
Required time 2 seconds
Related service mode COPIER> DISPLAY> DENS> P-B-AVE, P-B-MAX, P-B-MIN
8-125
8-125