Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1035

2) Remove the Side Cover.
•
1 Screw (The removed screw will be used in step 13.)
• 2 Hooks
3) Disconnect the USB Cable and the Control Panel Cable.
4) Hold the handle and remove the Main Controller PCB 1 while holding the cables.
x2
Control Panel Cable
USB Cable
Handle
9
Installation > Card Reader-C1 > Installation Procedure
Hook
Hook
F-9-164 F-9-164
Main Controller PCB 1
F-9-165 F-9-165
9
Installation > Card Reader-C1 > Installation Procedure
5) Remove the Face Cover. (The removed Face Cover will not be used.)
•
2 Screws (The removed screws will be used in step 7.)
x2
6) Install the PCB Spacer.
9-73
F-9-166 F-9-166
F-9-167 F-9-167
9-73