4
Parts Replacement and Clearning > Image Formation System > Removing the Developing Drive Unit
2) Loosen the screw and move the Belt Tensioner in the direction of the arrow, and then again
tighten the screw.
3) Remove the belt from the pully.
4
Parts Replacement and Clearning > Image Formation System > Removing the Developing Drive Unit
4) Remove the transformer.
•
2 Screws
•
3 Connectors
F-4-298
5) Free the harness and remove the Transformer Support Base.
•
1 Screw
•
Harness
F-4-299
x2
x3
F-4-300
F-4-301
4-171
4-171