Canon imageRUNNER ADVANCE 8105 Series Service Manual page 826

COPIER > FUNCTION > INSTALL
COM-TEST Disp connect result w/ Sales Co's server
Lv.1 Details To display the result of the connection test with the sales company's
server.
Use case When using Embedded-RDS
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range During operation: ACTIVE, When connection is completed: OK,
When connection is failed: NG
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-LOG,
RGW-ADR
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
COM-LOG Disp connect error w/ Sales Co's server
Lv.1 Details To display error information when the connection with the sales
company's server failed.
Use case When using Embedded-RDS
Adj/set/operate method Display only
Caution Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range Year, date, time, error code, error detail information (maximum 128
characters)
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
RGW-ADR
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
RGW-ADR URL setting of Sales Company's server
Lv.1 Details To set the URL of the sales company's server to be used for
Embedded-RDS.
Use case When using Embedded-RDS
Adj/set/operate method 1) Select the URL.
2) Enter the URL, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use Shift-JIS character strings.
- Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range URL
Default value https://a01.ugwdevice.net/ugw/agentif010
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
COM-LOG
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
8
Service Mode > COPIER > FUNCTION > INSTALL
8
Service Mode > COPIER > FUNCTION > INSTALL
COPIER > FUNCTION > INSTALL
CNT-DATE Set counter send start date to SC server
Lv.1 Details To set the year, month, date, hour and minute to send counter
information to the sales company's server.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case When the Embedded-RDS third-party expanded function is available
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
Default value 000000000000
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
CNT-INTV Set counter send interval to SC server
Lv.1 Details To set the interval of sending counter information to the sales
company's server in a unit of one hour.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case - When restarting potential control after execution of COPIER>
OPTION> IMG-FIX> PO-CNT
- When the D-max control condition is changed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 168 (=1 week)
Unit 1 hour
Default value 24
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
8-111
8-111