18) Close the HDD Cap.
•
1 Screw
CAUTION:
•
Be sure that the cables do not protrude from the [A] part of the HDD Cap.
•
If the cables protrude from the [A] part, allow extra slack of the cables at the [B] part
and tuck them to the host machine side.
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
19) Close the Controller Box.
CAUTION:
When closing the Controller Box, check that the LED Cable is not trapped or does not
contact with it.
[A]
[B]
F-9-336
20) Install the Rear Upper Cover.
MEMO:
Be sure to install the 3 TP screws show in the figure below.
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
9-155
F-9-337
F-9-338
9-155