User; Acc-Sts - Canon imageRUNNER ADVANCE 8105 Series Service Manual

■

USER

COPIER > DISPLAY > USER
SPDTYPE Dis of Ctrollr Board engine speed type
Lv.1 Details To display the engine speed type (ppm) of Controller Board.
Use case When checking the engine speed type of Controller Board
Adj/set/operate method N/A (Display only)
Display/adj/set range 85 to 105
BRWS-STS Display of service browser ON/OFF
Lv.1 Details To display whether the service browser can be used.
If the value is 1, [Service Browser] button is displayed on the service
mode initial screen.
The value of BRWS-STS switches whenever COPIER> FUNCTION>
INSTALL> BRWS-ACT is executed, but ON/OFF of service browser
is enabled after reboot. If the service browser does not start even
though the value of BRWS-STS is 1, turn OFF/ON the main power
switch.
Use case When checking the operation mode of the browser for service
engineers
Adj/set/operate method N/A (Display only)
Caution The value of BRWS-STS is linked with COPIER> FUNCTION>
INSTALL> BRWS-ACT, but the service browser cannot start even
though 1 is displayed unless the main power switch is turned OFF/
ON.
Display/adj/set range 1 to 2
1: ON (Available), 2: OFF (Not available)
Related service mode COPIER> FUCNTION> INSTALL> BRWS-ACT
8
Service Mode > COPIER > DISPLAY > ACC-STS
T-8-3 T-8-3
8
Service Mode > COPIER > DISPLAY > ACC-STS
■

ACC-STS

COPIER > DISPLAY > ACC-STS
FEEDER Display of DADF connection state
Lv.1 Details To display the connecting state of DADF.
Use case When checking the connection between the machine and DADF
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1
0: Not connected, 1: Connected
SORTER Connect state of Finisher-related option
Lv.1 Details To display the connecting state of Finisher-related options.
Use case When checking the connection of Finisher-related options
Adj/set/operate method N/A (Display only)
Display/adj/set range Left column (connecting state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connecting state of Finisher-belonged Inserter): 0 to 4
0: no hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
DECK Dis of Paper Deck connection state
Lv.1 Details To display the connecting state of the Paper Deck.
Use case When checking the connection between the machine and the Paper
Decks
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 8
0: Not connected
1: Connected (small) (Display is hidden on this machine.)
2: Connected (large)
3: POD Deck Lite (with Multi-purpose Tray)
4: POD Deck Lite (without Multi-purpose Tray )
5: Multi-purpose Tray only
6: POD deck
7: 2-POD deck connected
8: 3-POD deck connected (Display is hidden on this machine.)
CARD Dis of connection state of Card Reader
Lv.1 Details To display the connecting state of Card Reader.
Use case When checking the connection between the machine and the Card
Reader
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is
not available.)
1: Card Reader is not connected, or card is inserted while the Card
Reader is connected. (Copy is available.)
8-29
8-29