Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1178

Checking after Installation
1) Open the HDD Cover, and check that the LED is flashing.
The green LED of HDD1 (Slot1) is flashing.
•
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Execution of Auto Gradation Adjustment
Reporting to the System Administrator at the End of the
Work
When you have completed all installation work, report to the system administrator for the
following:
At the point when installation is completed, make explanations about how to check that
the appropriate security function has been added and enabled so that, when the function
becomes uncontrolled, the system administrator can immediately detect the problem and
request <Servicing work when a failure occurs>.
Execution of Auto Gradation Adjustment
When this product is installed, the machine initializes its HDD, resetting the data used for
auto gradation adjustment.
Therefore be sure to execute auto gradation adjustment (full adjust) after installing this kit.
F-9-437
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Execution of Auto Gradation Adjustment
9-216
9-216