16-2) Install the Card Reader Unit assembled in step 16-1).
•
1 Screw (TP; M4x12)
17) Put the connector of the Card Reader Unit through the hole on the Card Reader
Mounting Plate.
18) Connect the connectors of the Card Reader Unit and the Card Reader External Relay
Harness.
9
Installation > Card Reader-C1 > Installation Procedure
19) Install the Connector Case.
CAUTION:
When installing the Connector Cases, be sure to place the tie-wrap on the Card Reader
External Relay Harness on the inside of the Connector Cases.
F-9-175
F-9-175
20) Secure the Card Reader External Relay Harness to the Cord Guide.
20-1) Remove the cover of Cord Guide, and affix it to the area indicated in the figure.
F-9-176
F-9-176
9
Installation > Card Reader-C1 > Installation Procedure
9-76
Tie-wrap
Tie-wrap
F-9-177
F-9-177
F-9-178
F-9-178
9-76