Table of Contents
Advertisement
7) The message is shown when the system software is copied. Click "OK" button.
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
F-6-106
F-6-106
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
●
SST to USB memory Storage Device
Copy the system software stored in SST to the USB memory storage device storage device.
Preparation
Requirements:
•
PC with SST Ver. 4.22 or later installed
•
USB memory storage device (*)
Requirements for USB memory storage device:
Interface: USB 1.1 or later (USB 2.0 is recommended)
Memory capacity: 1GB or more is recommended (the total file size of the system software
is approx. 500MB).
Format: FAT (FAT 16), FAT32 (NTFS and HFS are not supported). The memory is formatted
in a partition (multiple partitions are not supported)
Unavailable USB memory: memory that is protected by a password or the encryption
technology.
Steps to copy the system software
1) Start the PC.
2) Insert the USB memory storage device storage device to the slot of the PC.
3) Start SST.
6-54
6-54
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
