Cleaning The Developing Assembly - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Cleaning the Developing Assembly
6) Place the Developing Assembly.
MEMO:
When the Developing Assembly is put on the floor or the desk, be sure to place paper
underneath to work on the Developing Assembly.
<Processing when replacing the parts>
1) Supplying Developing Assembly toner (COPIER>FUNCTION>INSTALL>TONER-S)
4
Parts Replacement and Clearning > Image Formation System > Cleaning the Developing Assembly

Cleaning the Developing Assembly

<Preparation>
1. Remove the Developing Assembly. (Refer to page 4-128)
<Procedure>
1) Remove the Developing Sleeve Cover.
•
4 Screws
F-4-180
2) Clean the 4 Developing Rollers with lint-free paper moistened with alcohol while rotating
them.
3) Clean the area outside of the sheet on the 2 Developing Sleeve Holders with lint-free paper
moistened with alcohol.
x4
Sheet
4-131
F-4-181
Sheet
F-4-182
4-131