4
Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
8) Remove the Connecting Drive Unit.
•
1 Screw
9) Pull out the Fixing Feed Unit.
CAUTION:
When pulling out the Fixing Feed Unit, be sure to place paper over the ETB Unit for
protection.
4
Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
10) Remove the Left Upper Cover 2.
•
1 Screw
•
1 Protrusion
F-4-254
11) Set the Fixing Feed Unit back.
12) Remove the Right Upper Inner Cover.
•
4 Screws
•
1 Connector
•
Harness
F-4-255
x4
4-158
F-4-256
F-4-257
4-158