Canon imageRUNNER ADVANCE 8105 Series Service Manual page 685

E Detail
Location Item
Code Code
E602 -1625 -00 Title Hard disk error
Remedy The document data (such as Box on the HDD) can be
damaged.
1. Enter the corresponding CHK-TYPE in the partition to
execute HDD-CHECK (duration: several minutes to several
dozen minutes); and then turn OFF and then ON the
power.
2. If the measures above do not solve the problem, enter the
corresponding CHK-TYPE in the partition to execute HDD-
CLEAR, and then turn OFF and then ON the main power.
(Use SST to perform reformat/reinstallation in the case of
the following: BOOTDEV, BOOTDEV2 and APL_SEND)
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Error in /APL_CDS.
E602 -2000 -00 Title Authentication error between Host Machine and Encryption
Board
Remedy 1. Connection error between the Encryption Board and the
Main Controller PCB (turn OFF and then ON the power).
2. Execute the key clear of the Encryption Board using SST (at
this time, HDD becomes unformatted; thus, it is necessary
to execute HDD format and system reinstallation).
Description Authentication error between Host Machine and Encryption
Board.
E602 -2001 -00 Title Discrepancy in the Encryption Board operation
Remedy Execute the key clear of the Encryption Board using SST (at
this time, HDD becomes unformatted; thus, it is necessary to
execute HDD format and system reinstallation).
Description Although the Host Machine does not have the authentication
information of the Encryption Board, the authenticated
Encryption Board is installed.
E602 -2002 -00 Title Failure of Encryption Board, others
Remedy 1. Connection error between the Encryption Board and the
Main Controller PCB (turn OFf and then ON the power).
2. Execute the key clear of the Encryption Board using SST (at
this time, HDD becomes unformatted; thus, it is necessary
to execute HDD format and system reinstallation).
3. After replacing the Encryption Board, execute HDD format
and system reinstallation using SST.
4. Main Controller PCB.
Description Failure of Encryption Board, others.
7
Error Code > Error Code > Error Code Details > E602
Description
7
Error Code > Error Code > Error Code Details > E602
E Detail
Location Item
Code Code
E602 -4000 -00 Title OS startup error
Remedy 1. Cable connection error.
2. After HDD All Format, reinstall the system software.
3. HDD.
Description Unable to install OS.
Error, the system of the host machine has not been started
normally.
Therefore the error code is not recorded in the log.
E602 -4001 -00 Title OS startup error
Remedy 1. Cable connection error.
2. After HDD All Format, reinstall the system software.
3. HDD.
Description No OS startup script.
Error, the system of the host machine has not been started
normally.
Therefore the error code is not recorded in the log.
E602 -FF00 -00 Title Hard disk error
Remedy 1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, start up
in Safe Mode to perform All Format using SST and reinstall
the system (SYSTEM, LANGUAGE, RUI), and then turn
OFF and then ON the main power.
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Unidentified partition error.
E602 -FF01 -00 Title Hard disk error
Remedy 1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, start up
in Safe Mode to perform All Format using SST and reinstall
the system (SYSTEM, LANGUAGE, RUI), and then turn
OFF and then ON the main power.
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Unidentified partition error.
E602 -FF02 -00 Title Hard disk error
Remedy 1. Check the Cable and Power Connector.
2. If the measures above do not solve the problem, start up
in Safe Mode to perform All Format using SST and reinstall
the system (SYSTEM, LANGUAGE, RUI), and then turn
OFF and then ON the main power.
3. If the error still remains, it can be caused by HDD failure;
therefore, replace the HDD and reinstall the system.
Description Unidentified partition error.
7-71
Description
7-71