Canon imageRUNNER ADVANCE 8105 Series Service Manual page 835

COPIER > FUNCTION > CLEAR
KEY-CLR Encrypt key clear of HDD Encrypt Board
Lv.2 Details To clear the encryption key of the HDD Encryption Board (Security
Kit) for replacement.
Processing is executed at the time of replacement of the Encryption
Board, and a new encryption key is generated.
Use case When replacing the encryption key for the HDD Encryption Board
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
2) Turn OFF/ON the main power switch.
Caution Since all data in the HDD becomes unavailable when executing this
item, be sure to initialize the HDD after turning OFF/ON the main
power switch.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
USBM-CLR Initialize USB MEAP priority rgst info
To initialize the registered ID data retained in the OS field by calling
Lv.1 Details
the API provided by the OS.
Use case When a failure occurs in USB MEAP priority registration
JV-CACHE Cache clear of JAVA application
Lv.1 Details To clear the cache information used by JAVA application.
Use case When initializing the JAVA application
Adj/set/operate method Select the item, and then press OK key.
FXTX-CLR Clearing fax job information
Lv.1 Details To clear fax job information stored on SRAM.
Use this mode to restore from E611-0001.
Use case When E611-0001 occurs
Adj/set/operate method Select the item, and then press OK key.
TR-BLT Clearing Transfer Belt parts counter
Lv.1 Details To clear ETB parts counter when replacing to a new Transfer Belt
(ETB).
Use case When replacing to a new ETB
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> COUNTER> DRBL-1> TR-BLT
GRD-CRNT Init of Primary Charging Wire current VL
Lv.1 Details To initialize the current value of the Primary Charging Wire by
initializing the voltage value of the grid wire.
The current value of the Primary Charging Wire is linked with the
usage status; thus, execute initialization at the time of replacement.
Use case When replacing the Primary Charging Wire
Adj/set/operate method Select the item, and then press OK key.
8
Service Mode > COPIER > FUNCTION > MISC-R
T-8-51
8
Service Mode > COPIER > FUNCTION > MISC-R
■
MISC-R
COPIER > FUNCTION > MISC-R
SCANLAMP Light-up check of LED
Lv.1 Details To light up the LED for 3 seconds.
Use case When replacing the LED
Adj/set/operate method Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Required time 3 seconds
CLM-PLTN Sampling of color copyboard read MTF VL
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When color copyboard reading is performed, the controller performs
sampling of the MTF value. This value is set in COPIER> ADJUST>
CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the Copyboard Glass.
2) Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Related service mode COPIER> ADJUST> CCD> MTF2-M1 to 12, MTF2-S1 to 12
BWM-PLTN Sampling of B&W copyboard read MTF value
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When B&W copyboard reading is performed, the controller performs
sampling of the MTF value. This value is set in COPIER> ADJUST>
CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the Copyboard Glass.
2) Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Related service mode COPIER> ADJUST> CCD> MTF2-M1 to 12, MTF2-S1 to 12
8-120
8-120