4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Unit
Removing the ETB Unit
<Preparation>
1. Pull out the Fixing Feed Unit.
1-1)
Open the Front Cover.
1-2)
Turn the Fixing Feed Unit Pressure Release Lever in the direction of the arrow to pull
out the Fixing Feed Unit.
4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Unit
1-3)
out the Fixing Feed Unit until it stops.
F-4-186
Push to release the Release Springs at both sides of the Rail, and then further pull
4-133
F-4-187
4-133