Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1166

Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.
Installation Procedure
■
Assembling the Option HDD
CAUTION:
When assembling the Option HDD, be sure to pay attention to the direction.
• Be sure that the label face of the Option HDD is up.
•
Be sure that the [A] part of the HDD Support Plate is on the other side of the
connecter.
Connecter
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installation Procedure > Assembling the Option HDD
[A]
Label
F-9-406
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installation Procedure > Assembling the Option HDD
1) Assemble the Option HDD (250GB).
• 1 HDD Support Plate
•
4 Anti-vibration Dampers
•
4 Spacers
• 1 Option HDD
•
1 HDD Grounding Plate
•
4 Screws (W Sems; M3x14)
(Tighten one of the screws together with the HDD Grounding Plate)
•
1 Screw (TP; M3x6)
x5
TP; M3x6
HDD Grounding
Plate
9-204
Connector
Option HDD
HDD Support Plate
Spacer
Anti-vibration Damper
F-9-407
9-204