Installing The Fixing Assembly - Canon imageRUNNER ADVANCE 8105 Series Service Manual

6) Loosen the screw and slide the Deck Pressure Plate in the direction of the arrow. Check
that the screw position is at the engraved mark [1], and then tighten the screw.
7) Close the Left and Right Decks.
9
Installation > Installation > Installing the Fixing Assembly
Engraved Mark Deck Pressure
Plate
Screw
F-9-38 F-9-38
9
Installation > Installation > Installing the Fixing Assembly

Installing the Fixing Assembly

1) Remove the tape securing a tag.
2) Turn the Fixing Feed Unit Release Lever in the direction of the arrow and pull the Fixing
Feed Unit all the way out.
9-21
F-9-39 F-9-39
9-21