Canon imageRUNNER ADVANCE 8105 Series Service Manual page 891

COPIER > OPTION > USER
USBH-DSP Display/hide of "Use USB Host"
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use USB Host".
By selecting "1: Display", whether to use USB host on USB Settings
screen can be selected.
Use case When switching to display or hide "Use USB Host" on USB Settings
screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences > External Interface > USB Settings > Use USB Host
USBM-DSP Dis/hide of USB ex-memory device driver
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB External Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB external memory device.
Use case When prohibiting the user administrator to change the setting of
"Use MEAP Driver for USB External Device", set 0 after the specified
setting is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related user mode Preferences> External Interface> USB Settings> Use MEAP Driver
for USB External Device
USBI-DSP Dis/hide of USB input device driver set
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB Input Device".
By selecting "0: Hide", the item is not displayed, and the user
administrator cannot change the setting of the MEAP driver for the
USB input device.
Use case When prohibiting the user administrator to change the setting of "Use
MEAP Driver for USB Input Device", set 0 after the specified setting
is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
Related user mode Preferences > External Interface > USB Settings > Use MEAP Driver
for USB Input Device
8
Service Mode > COPIER > OPTION > USER
8
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
CTCHKDSP Display/hide of counter print
Lv.1 Details To set whether to display or hide "Print List" on the Counter Check
screen.
Model name, model number information, counter check date and
counter information can be output as a total count management
report.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
DFLT-ADJ Tgt Auto Adj Gradation initial dis set
Lv.1 Details To set the initial display (highlight in blue) of the target Full Adjust/
Quick Adjust items on Auto Adjust Gradation screen of user mode.
This setting is enabled when EFI Controller is connected or only on
the copy model which Adobe PS/PDF is available.
When 0 is set, the adjustment item is not displayed.
When 1 to 3 is set, the target adjustment item (Copy/Printer/Both) is
displayed to select (highlighted in blue).
Use case When switching the initial display at the time of Auto Adjust Gradation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Adjustment item is not displayed.
1: "Copy" in the target adjustment items is selected.
2: "Printer" in the target adjustment items is selected.
3: "Both" in the target adjustment items is selected.
Default value 0
Related user mode Settings/Registration> Adjustment/Maintenance> Auto Adjust
Gradation
USBR-DSP Dis/hide of USB infrared device driver
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB Infrared Device."
Use case When prohibiting the user administrator to change the setting of
"Use MEAP Driver for USB Infrared Device," set 0 after the specified
setting is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences > External Interface > USB Settings > Use MEAP Driver
for USB Infrared Device
8-176
8-176