4
Parts Replacement and Clearning > Fixing > Removing the Main Thermistor
2) Remove the Pressure Roller Static Eliminator.
•
1 Screw
4
Parts Replacement and Clearning > Fixing > Removing the Main Thermistor
Removing the Main Thermistor
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Refer to page 4-173)
3. Remove the Fixing Front Cover. (Refer to "Removing the Fixing Cleaning Web")
<Procedure>
1) Remove the Harness Guide Cover and free the Harness from the Guide.
•
1 Screw
•
Edge Saddle
•
Harness Guide
F-4-339
4-186
F-4-340
4-186