Canon imageRUNNER ADVANCE 8105 Series Service Manual page 463

4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit
3) Loosen the screw and move the Belt Tensioner in the direction of the arrow, and then again
tighten the screw.
4) Remove the belt from the pully.
4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit
5) Remove the Duct.
•
2 Screws
F-4-285
6) Open the Front Cover to move the Fixing Feed Lever down.
(To move the cam at the rear of the Fixing Feed Lever Shaft to the position where it does
not interfere with the Waste Toner Feed Unit.)
F-4-286
x2
4-167
F-4-287
F-4-288
4-167