Canon imageRUNNER ADVANCE 8105 Series Service Manual page 691

E Detail
Location Item
Code Code
E719 -0012 -00 Title IPC error at Card Reader operation
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description Open circuit of IPC, unable to recover the IPC communication.
E719 -0031 -00 Title Communication error when the Card Reader (serial) is started
Remedy 1. Check the cable connection of the Card Reader (connector
connection error, open circuit), and then go through the
following to clear the error: Service Mode > COPIER >
FUNCTION > CLEAR > ERR.
2. After removing the Card Reader, execute the following
service mode, and then reinstall the Card Reader.
•
•
Description Unable to start communication with the Card Reader at
startup.
E719 -0032 -00 Title Communication error after the Card Reader (serial) is started
Remedy Check the cable connection of the Card Reader (connector
connection error, open circuit), and then go through the
following to clear the error: Service Mode > COPIER >
FUNCTION > CLEAR > ERR.
Description Although communication with the Card Reader was possible
at startup, it became unavailable in the middle of it.
E720 -0001 -05 Title Different model error
Check the configuration of options.
Remedy
Description Not proper Finisher is connected.
E720 -0002 -05 Title Different model error
Check the configuration of options.
Remedy
Description Not proper Option Deck is connected.
E730 -1001 -00 Title PDL software error
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
Description Initialization error.
E730 -100A -00 Title PDL software error
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
Description Systematic fatal error, such as initialization failure, occurs.
7
Error Code > Error Code > Error Code Details > E710 to E753
Description
COPIER>FUNCTION>CLEAR>CARD
COPIER>FUNCTION>CLEAR>ERR
7
Error Code > Error Code > Error Code Details > E710 to E753
E Detail
Location Item
Code Code
E730 -9004 -00 Title Third party PDL communication error
Remedy 1. Turn OFF and then ON the power.
2. Check the cable connection.
3. Replace the Open I/F PCB, F Link PCB (Main/Sub).
4. Replace the Main Controller PCB.
Description Communication error with the print server.
E730 -9005 -00 Title Third party PDL communication error
Remedy 1. Turn OFF and then ON the power.
2. Check the cable connection.
3. Replace the Open I/F PCB, F Link PCB (Main/Sub).
4. Replace the Main Controller PCB.
Description Error in video cable connection with the print server.
E730 -A006 -00 Title PDL communication error
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
3. Check the connection of the Main Controller PCB.
4. Reinstall the firmware.
5. Replace the Main Controller PCB.
Description No reply from PDL. Due to failure of Subbootable, or no
existence, there is no reply from PDL.
E730 -A007 -00 Title Mismatched PDL version
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
3. System All Format and installation.
Description Version of the host machine control software and version of
PDL control software are different.
E730 -B013 -00 Title PDL embedded font error
Remedy 1. Turn OFF and then ON the power.
2. Reinstall the system.
3. System All Format and installation.
Description Font data is corrupted.
E732 -0000 -00 Title Reader communication error
Remedy 1. Check the connection of the Connector with the Reader.
2. Check the power of the Reader (check if the initialization
operation is executed at startup).
3. Replace the Reader Controller PCB and the Main
Controller PCB.
Description Negotiation failure.
7-77
Description
7-77