Canon imageRUNNER ADVANCE 8105 Series Service Manual page 952

SORTER > ADJUST
PFLTRR42 Adj of LTRR 4-fold position (2nd): PFU
Lv.1 Details To adjust the 2nd fold position of LTRR paper 4-fold position on
Paper Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -65 to 65
Unit 0.5 mm
Appropriate target value 0
Default value 0
PF-A4R21 Adj of A4R 2-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of A4R paper 2-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 30
Unit 0.5 mm
Appropriate target value 0
Default value 0
PFLTRR21 Adj of LTRR 2-fold position (1st): PFU
Lv.1 Details To adjust the 1st fold position of LTRR paper 2-fold position on Paper
Folding Unit.
As the value is incremented by 1, the fold position moves by 0.5mm.
Use case When the fold position adjustment in user mode is inadequate
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -75 to 30
Unit 0.5 mm
Appropriate target value 0
Default value 0
PRCS-ALG Adjust Process Tray Align Plate width
Lv.1 Details To adjust the width of Alignment Plate on Finisher Process Tray
Assembly.
As the value is incremented by 1, the width of Alignment Plate is
increased by 0.1mm.
+: Increase (widen)
-: Decrease (narrow)
Use case When the paper displacement occurs on paper stack
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm
8
Service Mode > SOATER > ADJUST
8
Service Mode > SOATER > ADJUST
SORTER > ADJUST
STP-F1 Front 1-staple position (R size)
Lv.1 Details To adjust the A4R/LGL/LTRR paper front 1-staple position on
Finisher.
As the value is incremented by 1, the staple position moves by
0.1mm.
+: Toward front
-: Toward rear
Use case When the A4R/LGL/LTRR paper front staple position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -50 to 50
Unit 0.1 mm
STP-F2 Front 1-staple position(half size)
Lv.1 Details To adjust the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper front
1-staple position on Finisher.
As the value is incremented by 1, the staple position moves by
0.1mm.
+: Toward front
-: Toward rear
Use case When the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper front staple
position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -50 to 50
Unit 0.1 mm
STP-R1 Rear 1-staple position (R size)
Lv.1 Details To adjust the A4R/LGL/LTRR paper rear 1-staple position on
Finisher.
As the value is incremented by 1, the staple position moves by
0.1mm.
+: Toward front
-: Toward rear
Use case When the A4R/LGL/LTRR paper rear staple position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -50 to 50
Unit 0.1 mm
8-237
8-237