Canon imageRUNNER ADVANCE 8105 Series Service Manual page 523

4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Main Drive Unit
CAUTION:
When installing the Feed Driver PCB Unit, be sure to follow the order as shown in the
figure to tighten screws.
x4
7) Remove the Flywheel.
•
2 Screws
•
2 Washers
x2
4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Main Drive Unit
8) Loosen the screw and move the Belt Tensioner in the direction of the arrow, and then again
tighten the screw.
9) Remove the belt from the pully.
F-4-468
F-4-469
4-227
F-4-470
F-4-471
4-227