Removing The Sub Thermistor 1 - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Fixing > Removing the Sub Thermistor 1

Removing the Sub Thermistor 1

<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Refer to page 4-173)
<Procedure>
1) Remove the Harness Guide Cover.
•
1 Screw
2) Remove the Harness to free as shown in the figure.
•
4 Connectors
•
Edge Saddle
• Wire Saddle
x4
4
Parts Replacement and Clearning > Fixing > Removing the Sub Thermistor 1
3) Remove the Fixing Sub Thermistor 1 Holder.
•
1 Screw
4) Remove the Fixing Sub Thermistor 1.
• 1 Screw
F-4-345
F-4-346
4-188
F-4-347
F-4-348
4-188