2) Install the Encryption Board.
•
4 Screws (TP; M3x6)
x4
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
3) Install the HDD Case Unit.
•
2 Hooks
•
2 Bosses
•
2 Screws (Use the screws removed in "Removing the HDD and HDD Case Unit" step 10).)
MEMO:
Be careful not to catch the plate of the host machine with the Wire Saddles on the rear
side of the HDD Case Unit, otherwise the installation work may become difficult.
F-9-566
9
Installation > [TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the Encryption Board and
x2
引掛け
Hook
9-282
Hook
ボス
Boss
F-9-567
9-282