Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1281

2) Pull out the cables to the front, and connect the Signal Cable and the Power Supply Cable
to the Encryption Board.
x2
3) Install the Encryptiong Board.
•
4 Screws (TP; M3x6)
x4
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
4) Secure the Signal Cable and the Power Supply Cable in place using the 2 Wire Saddles at
the back of the HDD Case Unit.
5) Fold extra length of the cable and secure it with the 2 Wire Saddles [A].
F-9-642
F-9-643
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
x2
9-319
F-9-644
9-319