Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1285

x2
<In the Case of 2 HDDs>
12) Put the Signal Cables and the Power Supply Cables through [A] part.
13) Connect the 4 connectors of the Signal Cables and the Power Supply Cables to the
Encryption Board.
CAUTION:
•
When connecting the Signal Cables, the side labeled "ch.A" or "ch.B" should be
connected to CH A or CH B on the Encryption Board.
•
When connecting the Power Supply Cables, the cable on the Slot.1 side should be
connected to CH A, and the other cable on the Slot.2 side should be connected to
CH B.
B
C H
A
C H
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
Signal Cable (550mm; FK2-7826)
Power Supply Cable (570mm; FK2-7831)
F-9-653
Power Supply Cable
Signal Cable
Signal Cable
Power Supply Cable
F-9-654
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Installing the Encryption Board
[A]
Power Supply Cable (570mm; FK2-7831)
x4
CH B
CH A
Power Supply Cable (570mm; FK2-7831)
9-323
Signal Cable
(550mm; FK2-7827)
Signal Cable
(550mm; FK2-7826)
F-9-655
9-323