4
Parts Replacement and Clearning > External Auxiliary System > Removing the Upright Control Panel
2) Disconnect the connector and Grounding Wire.
•
1 Screw
3) While avoiding the harness and Motor Driver PCB Unit, remove the Upper High Voltage
Unit.
•
1 Screw
4
Parts Replacement and Clearning > External Auxiliary System > Removing the Upright Control Panel
Removing the Upright Control Panel
1) Remove the Joint Cover L and Joint Cover R.
•
2 Screws
x10
F-4-504
2) Free the Power Supply Cable from the Clump.
•
1 Screw
F-4-505
Joint Cover R
Joint Cover L
x2
Power Supply Cable
Cable Clamp
4-238
F-4-506
F-4-507
4-238