Receive/Forward - Canon imageRUNNER ADVANCE 8105 Series Service Manual

POP Server
POP Address
POP Password
POP Interval
POP AUTH Method
POP Authentication before Sending
SMTP Authentication (SMTP AUTH)
User
Password
Allow SSL (POP)
Allow SSL (SMTP Send)
Display Auth. Screen When Send
Allow SSL (SMTP Receive)
Maximum Data Size for Sending
Default Subject
Use SMTP Authentication for Each User
Specify Authentication User Dest. to Reply
Set Authorized User Destination to Sender
Allow Sending to Unregistered Destinations
Full Mode TX Timeout
Print MDN/DSN upon Receipt
Use Send via Server
Allow MDN Not via Server
Restrict TX Destination Domain
Restrict Sending to Domains
Permitted Domains
■

Receive/Forward

* Default Setting
*1 Indicates items that appear only when the appropriate optional equipment is attached.
*7 Indicates item that is not delivered as device information.
Receive Type, Details/Edit, Delete, Print List, E-Mail Priority
Output Report
TX/RX User Data List
Common Settings
Print on Both Side
Select Drawer
Switch A
Item
Item
Appendix > List of User Mode > Device Information Delivery Settings
Setting Description
Server name or IP Address (48 characters maximum)
64 characters maximum
32 characters maximum
0* to 99 (If the interval is set to '0', the incoming e-mail is not
checked automatically.)
Standard*/APOP/POP AUTH
On, Off*
On, Off*
User name for SMTP authentication (64 characters maximum)
Password for SMTP authentication (32 characters maximum)
On, Off*
On, Off*
On, Off*
Always SSL,On, Off*
0=(Off)/1 to 99 MB (3MB*)
40 characters maximum (Attached Image*)
On*, Off
On, Off*
On*, Off
On, Off*
1 to 99 hours (24hours*)
On, Off*
On, Off*
On*, Off
On, Off*
Register, Details/Edit, Delete
Setting Description
Print List
On, Off*
On*, Off
Appendix > List of User Mode > Device Information Delivery Settings
10-LVII
Device Information
Delivery Available
No
No
No
No
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
T-10-16 T-10-16
Device Information
Delivery Available
No
Yes
Yes
10-LVII