Canon imageRUNNER ADVANCE 8105 Series Service Manual page 403

4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Assembly
CAUTION:
When removing the Pre-transfer Charging Assembly, be careful not to hold the PCB of
the Pre-transfer Charging Assembly.
PCB
4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Assembly
Note: Points to Note at Installation
Be sure to fit the Transfer Charging Assembly to the groove on the host machine and
install it horizontally.
PCB
F-4-118
<Processing when replacing the parts>
1) Clear the parts counter. (COPIER>COUNTER>DRBL-1>PO-UNIT)
2) Clean the Charging Wire. (COPIER>FUNCTION>CLEANING>WIRE-EX)
F-4-119
4-107
F-4-120
4-107