7) Affix the HDD No.1 Label to the handle of the Removable HDD
8) Write down the serial number of the host machine to the label for recording the number,
and affix it to the area indicated in the figure.
illust
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Changing Configuration insi
■
Changing Configuration inside of HDD Case Unit
1) Remove the washer from the HDD Case Unit, remove the shaft of HDD Cap, and then
remove the HDD Fixed Plate. (The removed HDD Fixed Plate will not be used.)
2) Put the HDD Cap and the shaft back to the HDD Case Unit, and secure HDD Case Unit
with the washer.
3) In the case of using 2 HDDs, remove the Face Plate. (The removed Face Plate will not be
used.)
•
1 Screw
9
Installation > HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit > In the Case of the Removable HDD > Changing Configuration insi
9-336
F-9-683
F-9-684
9-336